Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

3.4 OIL PUMP 3.4 OIL PUMP Perform the following procedures for removal and installation of the oil pump. 3.4.1 Oil Pump Removal Remove the oil pump assembly as follows: 1. Remove the oil pan from the cylinder block. Refer to section 3.1.1. 2. Remove the sump pipe from the oil pump. See Figure 3-11. Discard the gasket. 1. Oil Pump 5. Sump Pipe 2. Oil Pump Mounting Bolt 6. Bracket 3. Gasket 7. Bracket Mounting Bolt 4. Sump Pipe Mounting Bolt Figure 3-11 Oil Pump and Sump Pipe Removal [a] Remove the bolt attaching the sump pipe bracket to the cylinder block. [b] Remove the two bolts attaching the sump pipe to the oil pump. Discard the gasket.

[c] Remove the sump pipe and bracket from the oil pan. All information subject to change without notice. 3-14 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION