MBE 4000 SERVICE MANUAL 12. Remove the thermostat housing from the coolant pump. 4.2.2 Coolant Pump Disassembly Disassemble the coolant pump unit as follows: 1. Remove the coolant pump from the engine. Refer to section 4.2.1. 2. Using a puller, pull the coolant pump hub away from the bearing. See Figure 4-5. 1. Puller 3. Coolant Pump Housing 2. Hub Figure 4-5 Pulling the Hub All information subject to change without notice. 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 4-11