7.3 EGR EXHAUST MANIFOLD 11. Remove exhaust manifold two-piece gasket from cylinder heads. See Figure 7-14. 1. Two-Piece Gasket 3. Gasket Overlap (Rear overlaps the Front) 2. Guide Studs Figure 7-14 Removal or Installation of Exhaust Manifold Gaskets 7.3.2 EGR Exhaust Manifold Installation Install the EGR exhaust manifold as follows: NOTE: The three-piece exhaust manifold and its related parts are first put together as an assembly; it is then mounted to the cylinder heads as one unit. 1. Install the exhaust manifold guide studs to the cylinder head and mount the two exhaust manifold gaskets. The rear gasket will overlap the front in the center of block. See Figure 7-14.
All information subject to change without notice. 7-22 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION