7.4 EGR COOLER AND COOLER SUPPORT BRACKET 17. Remove the reed valves from housing. See Figure 7-26. 1. EGR Cooler Housing 4. EGR Reed Valve Flange 2. EGR Cooler Gasket 5. Reed Valves 3. EGR Cooler Intermediate Flange Figure 7-26 Removing the EGR Cooler Flange and Components 18. Remove the intermediate flange and gasket from cooler flange assembly. See Figure 7-26. 7.4.2 EGR Cooler and Support Bracket Installation Install the EGR cooler and the EGR cooler support bracket as follows: NOTE: Exhaust manifold gaskets will have to be installed before EGR cooler support or cooler can be installed. Refer to section 7.3.2. All information subject to change without notice.
7-34 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION