MBE 4000 SERVICE MANUAL 1. Install coolant outlet pipe. Install the two M8 x 25 mm bolts through the coolant pipe flange, metal gasket and into the coolant pump. Leave loose until the cooler assembly is installed, then torque bolts to 35 N·m (26 lb·ft). See Figure 7-27. 1. Coolant Outlet Pipe Bolts 4. EGR Coolant Outlet Pipe 2. Coolant Vent Line 5. Coolant Outlet Pipe Bracket 3. Membrane Figure 7-27 Installation of Coolant Outlet Pipe NOTE: Coolant outlet pipe must be installed to coolant pump before the EGR cooler support and cooler are installed. All information subject to change without notice. 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 7-35