MBE 4000 SERVICE MANUAL * Threads may have residual oil, but will be dry to the touch. Use one of the previous tables if either the male or female threads (bolt and nut) are plated or lubricated. Coat all plated and Table 7 Torque Specifications Table Four unplated fasteners with oil before installation. All information subject to change without notice. 38 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION Torque Values for U.S. Customary Thread Fasteners with Dry (Unlubricated)* or Plain (Inplated) Threads† Thread Diameter-Pitch Flanged, Torque:
lb·ft (N·m) Grade 8 or C Nut Grade G Nut 1/4–20 1/4–28 — — 5/16–18 5/16–24 22 (30) — 3/8–16 3/8–24 40 (54) — 7/16–14 7/16–20 65 (88) — 1/2–13 1/2–20 95 (129) — 9/16–12 9/16–18 140 (190) — 5/8–11 5/8–18 190 (258) — 3/4–10 3/4–16 340 (461) — 7/8–9 7/8–14 — — 1–8 1–12 1–14 — — —