MBE 4000 SERVICE MANUAL 8.1 DRIVE BELTS There are three v-ribbed drive belts on the MBE 4000 engine: The main drive belt — (nine ribs) The fan belt — (eight ribs) The air conditioner compressor belt (installed only on vehicles with air conditioning) — (six ribs) The main drive belt has nine ribs and drives the alternator and coolant pump. The fan belt has eight ribs and the air conditioner compressor belt (if installed) has six ribs. NOTE: Before removing and installing a belt, check belt function and make sure to install the correct belt. There are three idler pulleys on the MBE 4000 engine, one on the main drive belt and two on the fan belt.
One of the fan belt idler pulleys has a ribbed belt contact surface; the others are smooth. There is no idler pulley installed for the air conditioner compressor belt. 8.1.1 Main Drive Belt Removal Remove the main drive belt as follows: NOTE: There are three v-ribbed drive belts on the MBE 4000 engine. Be sure to remove and install the correct belt(s). 1. Disconnect the batteries. All information subject to change without notice. 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 8-3