8.1 DRIVE BELTS 2. Release the tension on the main drive belt. See Figure 8-1. 1. Alternator 3. Belt Tensioner 2. Main Drive Belt 4. Socket Wrench Figure 8-1 Releasing Belt Tension [a] Place a socket wrench on the tensioner pulley bolt. [b] Pull the socket wrench (swivel the tensioner pulley counterclockwise) to remove the tension from the belt. [c] Hold the tensioner pulley in this position for the next step. All information subject to change without notice. 8-4 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION