MBE 4000 SERVICE MANUAL 3. Remove the drive belt from the alternator, coolant-pump and idler pulleys. Be careful not to kink, stretch, or otherwise damage the belt. See Figure 8-2. 1. Vibration Damper 4. Idler Pulley 2. Tensioner Pulley 5. Main Drive Belt 3. Alternator Pulley 6. Coolant Pump Pulley Figure 8-2 Main Drive Belt Removal 4. Release the tensioner pulley. 5. Inspect the drive belt for nicks, wear, or other damage. Replace the belt if necessary. 6. Inspect the following parts and replace any that are damaged or worn:
vibration damper alternator pulley coolant-pump pulley belt tensioner tensioner pulley idler pulley 8.1.2 Main Drive Belt Installation Install the main drive belt as follows: All information subject to change without notice. 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 8-5