Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

8.1 DRIVE BELTS 1. Fit the main drive belt on the belt pulleys. Be careful not to kink, stretch, or otherwise damage the belt. For correct routing, see Figure 8-3. Do not fit the belt onto the tensioner pulley yet. 1. Alternator Pulley 4. Main Drive Belt 2. Idler Pulley 5. Vibration Damper 3. Coolant Pump Pulley 6. Tensioner Pulley Figure 8-3 Main Drive Belt Routing 2. Release the tension on the main drive belt. See Figure 8-1. 3. Make sure the belt is correctly positioned for the tensioner pulley. 4. Restore the tension on the belt. [a] Lower the socket wrench to return the tensioner pulley to its original position. [b] Remove the socket-wrench bit from the pulley bolt. 5.

Check the main drive belt to make sure it is in the correct position and properly aligned on the pulleys. 6. Connect the batteries. 8.1.3 Fan Belt Removal Remove the fan belt as follows: 1. Disconnect the batteries. 2. Release the tension on the fan drive belt. See Figure 8-1. All information subject to change without notice. 8-6 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION