Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

MBE 4000 SERVICE MANUAL [a] Place a socket wrench on the tensioner pulley bolt. [b] Pull the socket wrench (swivel the tensioner pulley counterclockwise) to remove the tension from the belt. [c] Hold the tensioner pulley in this position for the next step. 3. Remove the drive belt from the fan and idler pulleys. Be careful not to kink, stretch, or otherwise damage the belt. See Figure 8-4. 1. Crankshaft Pulley 4. Fan Belt 2. Idler Pulley #1 5. Fan Pulley 3. Fan Belt Tensioner 6. Idler Pulley #2 Figure 8-4 Fan Belt Removal 4. Release the tensioner pulley. 5. Inspect the fan belt for nicks, wear, or other damage. Replace the belt if necessary. 6.

Inspect the following parts and replace any that are damaged or worn: vibration damper fan pulley belt tensioner tensioner pulley idler pulley 8.1.4 Fan Belt Installation Install the fan belt as follows: All information subject to change without notice. 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 8-7