Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

8.1 DRIVE BELTS 1. Fit the fan drive belt on the belt pulleys. Be careful not to kink, stretch, or otherwise damage the belt. For correct routing, see Figure 8-5. Do not fit the belt onto the tensioner pulley yet. 1. Tensioner Pulley 4. Idler Pulley #2 2. Idler Pulley #1 5. Fan Belt 3. Fan Pulley 6. Crankshaft Pulley Figure 8-5 Fan Belt Routing 2. Release the tension on the fan belt. See Figure 8-1. 3. Make sure the belt is correctly positioned for the tensioner pulley. 4. Restore the tension on the belt. [a] Lower the socket wrench to return the tensioner pulley to its original position. [b] Remove the socket-wrench bit from the pulley bolt. 5.

Check the fan belt to make sure it is in the correct position and properly aligned on the pulleys. 6. Connect the batteries. 8.1.5 Air Conditioner Compressor Belt Removal Install the air conditioner (A/C) compressor belt as follows: NOTE: The A/C compressor belt is installed only on vehicles with air conditioning. All information subject to change without notice. 8-8 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION