Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

MBE 4000 SERVICE MANUAL 7. Insert the compression test adaptor (J 45392 or 904 589 01 21 00) into the cylinder head. See Figure 1-12. Use the hold-down and bolt included in the kit. 1. Button (on hold-down) 4. Constant Throttle Valve Cover 2. Bolt 3. Fitting Figure 1-12 Installing the Test Adaptor [a] Make sure the smooth surface on the O-ring is pointing toward the test adaptor. [b] Install the hold-down with the two prongs around the test adaptor. Turn the hold-down (at the cylinder head) until the button in the base of the hold-down is aligned with the locating element in the end cover of the constant throttle. [c] Tighten the bolt attaching the hold-down to the cylinder head. NOTE:

Follow the equipment manufacturer's operating instructions to connect the compression tester. All information subject to change without notice. 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 1-21