Detroit Diesel — Print Preview - C:\Temp\APTCACHE\6SE412A\6SE412A Detroit Diesel

MBE 4000 SERVICE MANUAL 1.5 EGR FRONT AND REAR LIFTER BRACKETS The front lifter bracket on the non-EGR engine was moulded into the coolant pump. The EGR engine has separate front and rear lifter brackets. NOTICE: A spreader bar must be used at all times in conjunction with the front and rear lifter brackets to lift the EGR engine to ensure that no engine damage will result. The brackets are designed to lift vertically. 1.5.1 Removal of Front and Rear Lifter Brackets Perform the following steps to remove the front and rear lifter brackets: 1. Remove the four M10 x 25 mm mounting bolts from the front lifter bracket and remove the bracket. See Figure 1-32. 1.

Front Lifter Bracket Mounting Bolts 2. Front Lifter Bracket Figure 1-32 Removal / Installation of Front Lifter Bracket All information subject to change without notice. 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION 1-43