1.5 EGR FRONT AND REAR LIFTER BRACKETS 2. Remove the two bolts from the rear lifter bracket. See Figure 1-33. 1. Rear Lifter Bracket Mounting Bolts 3. Rear Lifter Bracket 2. Vent Line Bracket Figure 1-33 Removal / Installation of Rear Lifter Bracket 3. Remove the vent line bracket. 4. Remove the rear lifter bracket. 1.5.2 Installation of Front and Rear Lifter Brackets Perform the following steps to install the front and rear lifter brackets: 1. Install the front lifter bracket using the four M10 x 25 mm mounting bolts. See Figure 1-32. 2. Torque the four bolts to 60 N·m (44 lb·ft). 3. Install the rear lifter bracket using two mounting bolts. See Figure 1-33. 4.
Torque the two bolts to 200 N·m (147.5 lb·ft). All information subject to change without notice. 1-44 6SE412 0403 Copyright © 2004 DETROIT DIESEL CORPORATION