OPERATION MACHINE OPERATIONS AND CONTROLS 8. Turn fuel control dial (2) to the full speed (MAX)position and carry out the operation is Step 5 for 3 to 5 minutes. 9. Repeat the following operation 3 to 5 times and operate slowly. Boom operation RAISE LOWER Arm operation IN OUT Bucket operation CURL DUMP Swing operation LEFT RIGHT Travel (Lo) operation FORWARD REVERSE REMARK In the above operation is not carried out, there may be a delay in response when starting or stopping each actuator, so con- tinue the operation until it becomes normal. 10. Use working mode switch 2 on the monitor panel to select the working mode to be used.
NOTICE Canceling automatic warming-up operation If it becomes necessary in an emergency to lower the engine speed to low idling,cancel the automatic warming- up operation as follows. 1) Turn fuel control dial (2) to the full speed (MAX)posi- tion and hold it for 3 seconds. 2) When fuel control dial (2) is returned to the low idling (MIN) position,the engine speed will drop. 3-79