Komatsu — SWINGING

OPERATION MACHINE OPERATIONS AND CONTROLS SWINGING WARNING The rear of the machine extends outside the track width. Check that the surrounding area is safe before swinging be upper structure. Check that swing lock monitor is not lighted up. If the swing control lever is operated quickly, the upper structure will move quickly; if it is operated slowly, the upper structure will move slowly. 1. Before starting the swing operation, turn swing lock switch (1) OFF and check that swing lock monitor (2) has gone out. 2. Operate left work equipment control lever (3) to operate the swing. At the N position, the spring brake is applied. 3. When not using the swing, turn swing lock switch (1) ON.

Check that swing lock monitor (2) lights up. 3-87