Komatsu — STARTING MACHINE AFTER LONG-TERM STORAGE

LONG TERM STORAGE OPERATION AFTER STORAGE NOTICE If the machine is to be used when the monthly rust prevention operation has not been carried out, please contact your Komatsu distributor. When using the machine after long-term storage, do as follows before using it. Wipe off all the grease coating the hydraulic cylinder rods. Add oil and grease to all places. When the machine has been stored for a long time, the moisture in the atmosphere will get into the oil. Check the oil at all parts before and after starting the engine. If there is water in the oil, change all the oil.

STARTING MACHINE AFTER LONG-TERM STORAGE When starting the engine after long-term storage, cancel the automatic warming-up operation as follows. 1. Turn the starting switch key to the ON position. 2. Turn the fuel control dial from the low idling (MIN) position to the full (MAX) position, hold it there for 3 sec- onds, then return it to the low idling (MIN) position and start the engine. 3-120