Komatsu — PHENOMENA THAT ARE NOT FAILURES

OPERATION TROUBLESHOOTING TROUBLESHOOTING AFTER RUNNING OUT OF FUEL When starting after running out of fuel, fill with fuel and bleed the air from the fuel system before starting. For details of bleeding the air, see "REPLACE FUEL FILTER CARTRIDGE (PAGE 4-56)". PHENOMENA THAT ARE NOT FAILURES Note that the following phenomena are not failures: When the arm is pulled in, the speed of movement will drop momentarily when the arm is more or less vertical. The arm speed will drop momentarily when the bucket teeth are more or less horizontal. Bucket or arm shakes during heavy-duty digging opera- tions. When starting or stopping the swing, noise will be emitted from the brake valve.

When going down a steep slope at low speed, a noise will be emitted from the travel motor. 3-121