MAINTENANCE MAINTENANCE PROCEDURE CHECK AND TIGHTEN TRACK SHOE BOLTS If the machine is used with track shoe bolts (1) loose, they will break, so tighten any loose bolts immediately. Method for tightening Track shoe 1. First tighten to a tightening torque of 490 ± 49 N•m (50 ± 5 kgf•m, 360 ± 36 lbft) then check that the nut and shoe are in close contact with the link contact surface. 2. After checking, tighten a further 120є ± 10є. Road liner 1. Tighten to a tightening torque of 549 ± 59 N•m (56 ± 6 kgf•m, 405 ± 43 lbft). After tightening, check that the nut and shoe are in close contact with the link contact surface.
Order for tightening Tighten the bolts in the order shown in the diagram on the right. After tightening, check that the nut and shoe are in close con- tact with the link mating surface. AD053090 4-29