MAINTENANCE PROCEDURE MAINTENANCE 4. Stop the engine, open drain valve (2), and drain the water. 5. After draining the water, clean the radiator with detergent. For the cleaning method, follow the instruction of deter- gent. 6. Close drain valve (2). 7. Install the undercover. 8. Add water through the water filler up to the filler port. 9. Run the engine idle at a low speed for 5 minutes, then at a high speed for 5 minutes to bleed air mixed in the cool- ing water. (At this time, keep the radiator cap (1) removed.) 10. After draining off the cooling water of reserve tank (3) , clean the inside of the reserve tank and refill the water between FULL and LOW level. 11. Stop the engine.
About 3 minutes later, supply city water up to the water filler, then close radiator cap. 4-28