ATTACHMENT GUIDE ATTACHMENTS AND OPTIONS PC220,220LC For trimming of a slope and rolling compaction. : available : available only for light-duty work : not available NOTICE When the boom is fully lowered during oblique digging, the boom interferes with the undercarriage. Operate the boom carefully. Categories of use For general digging : Digging or loading sand, gravel, clay etc. For light duty digging : Digging or loading dry, uncaked earth and sand, mud etc. For loading work : Loading dry, loose earth and sand For digging or loading hard soil or soft rock, it is recommended that the strengthened bucket with high durabil- ity and high wear resistance be employed. *:
Equipped with side cutter. *1 is available only during loading operation.
6-22 Name of bucket Capacity (m3) SAE (CECE) Outside width (mm) Use Standard arm (3.0 m) Long arm (3.5 m) Short arm (2.5 m) Short arm (2.0 m) *Narrow bucket 0.72 (0.65) 900 (35") Narrow digging *Standard bucket 1.0 (0.9) 1260 (50") General digging *1 *Light duty bucket 1.17 (1.0) 1300 (51") Light duty digging Light duty bucket 1.26 (1.1) 1400 (55") Loading Slope finishing bucket 0.40 (0.35) – For triming of a slope and rolling compaction Trapezoidal bucket (Variable slope type) 0.55 (0.5) – Trapezoidal shaped diching Ripper bucket 0.61 (0.56) 950 (37") Digging rocks Clamshell bucket 0.66 (0.6) 866 (34") Ditching, loading Ditch cleaning bucket 0.8 (0.7) 1800 (71") Ditching, cleaning One tooth ripper – – Digging, removing rocks Three teeth ripper – – Digging, removing rocks