Frame and Frame Components 31 3. Grease the yoke tips, locks, and the release handle and spring; see Fig. 12 . Grease the mounting bracket supports through the grease fittings. A “low temp” grade grease rated for -30°F (-34°C) or lower such as Cato Oil and Grease #5213, Craftsman Chemical Co. #LTF 2, Mystic LP-200, or equivalent is recommended. 1 2 2 1 3 3 4 12/03/2010 f311135 1. Release Handle and Spring 2. Grease Fitting 3. Yoke Tip 4. Locks Fig. 12, Holland FW35 Fifth Wheel, Grease Lubrication Jost 12/03/2010 f311136 Lubricate the kingpin lock using a hand pump grease gun through the grease zerk on the skirt of the fifth wheel; see Fig. 10 . Apply a light oil to all moving parts.
For sliding fifth wheels spray diesel fuel on the slide path of the base plate. Use a light oil (such as SAE 10W or 20W motor oil) to lubricate the cam track and pivot. 1. Cam Plate Fig. 11, Holland FW35 Fifth Wheel, Oil Lubrication Castloc II and Simplex Series NOTICE Use a chassis or multipurpose grease to lubricate the two grease fittings located on either side of the fifth wheel top plate. Lubricate the two grease fittings lo- cated in the grease grooves on the fifth wheel top plate. Lubricate the two grease fittings located below the top plate mounting pins. Lubricate the lock mechanism. Do not use a power grease gun. The pressure will damage the lube line.
If the fifth wheel is not equipped with low-lube plates, apply a lithium-based grease with extreme pressure (EP) additive to the trailer contact surface of the fifth wheel. Once the fifth wheel’s moving parts are lubricated, apply a heavy coat of grease to the top plate, either through the grease fittings located on the underside of the top plate, or by direct application. On slide- mount applications, lubricate the slider lock pockets and the slider bracket. NOTE: If the fifth wheel is equipped with low-lube plates, the top plate only requires lubrication at the new product break-in stage. The low-lube plates re- quire no further lubrication.
Century Class Trucks Maintenance Manual, January 2016 31/8