Suspension 32 1 2 A 3 4 f320021a 05/27/93 f320023a 05/27/93 5 Fig. 3, Torque Arm Bushings A. 1/8" (3 mm) Clearance 1. Frame Fasteners 2. Frame Rail 3. Pry Bar 4. Equalizer 5. Equalizer Bracket 1 A 3 occur. Failure to replace a damaged spring assem- bly could cause an accident resulting in property damage, serious personal injury, or death. Fig. 5, Top View of the Equalizer Inspect the forward and rear spring brackets for wear, cracks, and other damage. If any of these con- ditions exist, replace the damaged bracket(s). See Group 32 of the Century Class Trucks Workshop Manual for instructions. 2 f320022a 05/27/93 A. Measure the change in gap at this point. 1. Equalizer Bracket 2. Equalizer 3.
Pry Bar WARNING Replace worn, cracked, or damaged spring brackets. Failure to do so could result in bracket breakage, possibly leading to loss of vehicle con- trol and resulting in personal injury or property damage. Fig. 4, Side View of the Equalizer equalizer bushings. See Group 32 of the Century Class Trucks Workshop Manual for instructions. Freightliner AirLiner Suspension Inspect the crossmember(s) and gussets for wear, cracks, and other damage. If any of these conditions exist, replace the damaged parts. See Group 32 of the Century Class Trucks Workshop Manual for instructions. WARNING IMPORTANT:
Before checking the AirLiner sus- pension height, make sure there is no load on the chassis, and the trailer is unhitched. Do not replace individual leaves of a damaged leaf spring assembly; replace the complete spring as- sembly. Visible damage (cracks or breaks) to one leaf causes hidden damage to other leaves. Re- placement of only the visibly damaged part(s) is no assurance that the spring is safe. On front spring assemblies, if cracks or breaks exist in the two top leaves, a loss of vehicle control could IMPORTANT: To prevent voiding the warranty on Barksdale height-control valves, note the fol- lowing: Century Class Trucks Maintenance Manual, January 2016 32/3