GENERAL FUEL COOLANT AND LUBRICANTS 12 Cooling System Test Kit The following cooling system test kit may be purchased from your distrib- utor. This Fleetguard ® coolant test kit, part number CC-2626 is used to check the concentration of coolant additives in the cooling system. 1. Test strip bottles 2. Solution #1 bottle 3. Small plastic container 4. Large plastic cup 5. Syringe 01-18 PC200-6LL/PC220LL-6 SCA Unit Concentration Guide Number of Solution A Drops to Cause Color Change Coolant Condition Action Required 0 - 10 Drops Extremely under-concentrated - less than 0.4 SCA units per 3.8 L Initially charge the system to a mini- mum of 1.0 SCA unit per 3.8 L.
11 - 16 Drops Marginally under-concentrated - 0.45 to 0.8 SCA units per 3.8 L Add SCA liquid units to maintain 1.0 SCA unit per 3.8 L minimum or change the DCA 4 coolant filter. 17 - 25 Drops Acceptable - 0.85 to 1.3 SCA units per 3.8 L None. 26 - 35 Drops Highly acceptable - 1.35 to 2.0 SCA units per 3.8 L None. 36 - 55 Drops Marginally over-concentrated - 2.1 to 3.3 SCA units per 3.8 L Review maintenance practice. Over 55 Drops Extremely over-concentrated Drain 50% of the coolant and replace with water antifreeze mixture. Retest the system for correct SCA unit concentra- tion.