DISASSEMBLY AND ASSEMBLY REVOLVING FRAME 12 REVOLVING FRAME Removal 1. Remove 2 boom cylinder assemblies. For details, see BOOM CYL- INDER ASSEMBLY, Removal. 2. Remove work equipment assembly. For details, see WORK EQUIPMENT, Removal. 3. Remove counterweight assembly. For details, see COUNTER- WEIGHT, Removal. 4. Disconnect top mounting hoses (1), (2), and (3) of swivel joint assembly at swivel joint assembly end. 5. Remove stopper link (4). 6. Remove mounting bolts, then lift off revolving frame assembly (5).
# Leave 2 bolts ➀ each at the front and rear, use a lever block to adjust the balance of the revolving frame assembly to the front and rear, and left and right, then remove the remaining bolts, and lift off. WARNING! When removing the revolving frame assembly, be careful not to hit the center swivel joint assembly Revolving frame assembly: Approximate weight 6340 kg 30-2 PC200-6LL/PC220LL-6