daewoo — Daewoo Wheel Loader Shop Manual

21. Slide the output flange onto the splined output shaft. See Figure 4-174. 24. Install the oil seal in the speedometer tube. FIGURE 4-182 4620 FIGURE 4-179 4617 Heat the speedometer gear and install it on the end of the drive shaft. See Figure 4-177. Assemble the drive shaft and tube. 22. Apply a non hardening sealant to the retaining disc. Install the disc over the output flange. See Figure 4-175. Install the bolts through the disc and tighten them to 49 Nm (36 ft lb). 23. Install the bolt lock plate. See Figure 4-176. FIGURE 4-183 4621 25. Place the speedometer gasket on the side of the transmission.

Insert the speedometer tube into the transmission and install the bolts to FIGURE 4-180 4618 FIGURE 4-184 4622 FIGURE 4-181 4619 hold it in place. See Figure 4-178. Tighten the 4-48 TORQUE CONVERTER AND TRANSMISSION Mega 300-III Shop Manual