6. Remove the lock bolt. See Figure 4-340. 9. Remove the seal, snap ring, and bearing from the housing. See Figure 4-343. FIGURE 4-340 4778 FIGURE 4-343 4781 7. Remove the bolts that hold the shift fork to the shift rod. See Figure 4-341. Assembly 1. Install into the housing, the dowel and control washer for shift travel. See Figure 4-344. FIGURE 4-341 4779 8. Remove the shift fork and the shift rod. See Figure 4-342. Remove the fingers from the shift fork. FIGURE 4-344 4782 2. Install the shim washer and secure it with the lock screw. See Figure 4-345. FIGURE 4-342 4780 FIGURE 4-345 4783 Mega 300-III Shop Manual TORQUE CONVERTER AND TRANSMISSION 4-83