daewoo — Daewoo Wheel Loader Shop Manual

7. Pry the oil seal out of the bore. See Figure 4-366. 10. Remove the snap ring and spacer washer. See Figure 4-369. FIGURE 4-366 4804 FIGURE 4-369 4807 8. Remove the snap ring and the spacer washer. See Figure 4-367. 11. Use a puller to remove the roller bearing. See Figure 4-370. FIGURE 4-367 4805 FIGURE 4-370 4808 9. Use a slide hammer to pull the shaft and bearing out of the transmission. See Figure 4-368. 12. Remove the cover from both bores near the output shaft bore. See Figure 4-371. FIGURE 4-371 4809 FIGURE 4-368 4806 4-88 TORQUE CONVERTER AND TRANSMISSION Mega 300-III Shop Manual