Differential Type Output Gearing 4. Use a puller to remove the bearing from the transmission. See Figure 4-363. Disassembly 1. On the disengagement gearbox, remove the lock from the two bolts that hold the output flange disc in place. Remove the bolts from the disc. Remove the disc from the output flange. Slide the output flange out of the gearbox. 2. Remove the bolts that hold the gearbox to the transmission. See Figures 4-361 and 4-413. Slide the gearbox off the transmission. FIGURE 4-363 4801 5. Working from the side of the transmission, remove the speedometer drive assembly. See Figure 4-364. FIGURE 4-361 4799 3. Lift the hollow driveshaft out of the transmis- sion. See Figure 4-362.
FIGURE 4-364 4802 6. Working on the output shaft of the transmis- sion, remove the lock from the two bolts that hold the output flange disc in place. Remove the bolts from the disc. Remove the disc from the output flange. Slide the output flange out of the transmission. See Figure 4-365. FIGURE 4-362 4800 FIGURE 4-365 4803 Mega 300-III Shop Manual TORQUE CONVERTER AND TRANSMISSION 4-87