15. Apply sealer to the disc. Install the disc. See Figure 4-358. Install the bolts through the disc. Tighten the bolts. Install the lock plate over the bolts. 16. Thread 2 assembly studs into the transmis- sion. See Figure 4-359. Slide the gasket over the studs. Slide the gearbox over the studs. Install the bolts into the gearbox. Tighten the bolts to 25 Nm (18 ft lb). FIGURE 4-358 4796 FIGURE 4-359 4797 4798 FIGURE 4-360 4-86 TORQUE CONVERTER AND TRANSMISSION Mega 300-III Shop Manual