WK Torque Converter 3. Prying carefully from both sides, remove the drive flange from the input shaft. See Figure 4-416. Disassembly 1. Figure 4-414 shows an assembled torque converter. FIGURE 4-416 4854 4. Suspend the assembly by its cover, and use a plastic hammer to lightly tap on the input shaft until the torque converter is separated from the cover. See Figure 4-417. FIGURE 4-414 4852 2. Remove the lock plate from the bolts that hold the disc for the output flange. See Figure 4-415 and the exploded view in Figure 4-465. Remove the bolts and the disc. FIGURE 4-417 4855 FIGURE 4-415 4853 4-98 TORQUE CONVERTER AND TRANSMISSION Mega 300-III Shop Manual