daewoo — Daewoo Wheel Loader Shop Manual

5. Match mark the pump wheel and the impeller cover, so that they can be returned to their original positions when assembled. Remove the nuts and bolts from the impeller cover. See Figure 4-418. 8. Carefully pry from both sides to lift the turbine wheel out of the impeller cover. See Figure 4-421. FIGURE 4-421 4859 FIGURE 4-418 4856 9. Remove the O-ring, square ring, and ball bearing from the turbine wheel. See Figure 4-422. 6. Use a plastic hammer to tap lightly on the impeller cover shaft. See Figure 4-419. This will separate the cover from the pump wheel. FIGURE 4-422 4860 FIGURE 4-419 4857 10. Remove the bolts that hold the hub to the turbine wheel. See Figure 4-423. Remove the hub. 7.

Figure 4-420 shows the torque converter sep- arated into 2 parts. FIGURE 4-423 4861 FIGURE 4-420 4858 Mega 300-III Shop Manual TORQUE CONVERTER AND TRANSMISSION 4-99