11. Remove the bolts that hold the backing plate pack to the impeller cover. See Figure 4-424. 14. Remove the shim and cup spring from the impeller cover. See Figure 4-427. FIGURE 4-424 4862 FIGURE 4-427 4865 12. Remove the plate pack and dowels. See Figure 4-425. There are 3 outer plates and 1 inner plate. 15. Use compressed air to force the piston out of the impeller cover. See Figure 4-428. FIGURE 4-425 4863 FIGURE 4-428 4866 16. Working on the pump wheel, remove the stator. See Figure 4-429. 13. Remove the snap ring. See Figure 4-426. FIGURE 4-426 4864 FIGURE 4-429 4867 4-100 TORQUE CONVERTER AND TRANSMISSION Mega 300-III Shop Manual