12. Remove the cross pin. See Figure 5-21. 15. Remove the thrust bearing and thrust washers from the sleeve. See Figure 5-24. Remove the spacer ring. Be sure to remove the spacer ring. It can stick in the sleeve. FIGURE 5-21 4950 13. Shake the ball out of the housing. See Figure 5-22. FIGURE 5-24 4953 16. Carefully slide the control spool out of the sleeve. See Figure 5-25. FIGURE 5-22 4951 14. Pull the sleeve and spool out of the housing. See Figure 5-23. FIGURE 5-25 4954 FIGURE 5-23 4952 5-10 POWER STEERING MEGA 300-III Shop Manual