Assembly 1. The relief valve pressure can be changed by changing springs. The following table displays the characteristics of the 3 springs available. See Figure 5-74. 3. Install the spool into the bore. See Figure 5-76. Use a nylon rod to position the spool in the neutral position. FIGURE 5-76 5005 4. Install the spring and the LS plug into the bore. See Figure 5-77. Use a new O-ring on the plug. FIGURE 5-74 5003 2. Figure 5-75 shows the PP plug and the spool.
FIGURE 5-77 5006 FIGURE 5-75 5004 MEGA 300-III Shop Manual POWER STEERING 5-21 Pressure in Bars Wire Diameter (d) Coil Inner Diameter (Di) Spring Height (H) 4 2.5 mm (.0984") 12.5 mm (.492") 50 7 3.0 mm (.118") 12.5 mm (.492") 50 10 3.2 mm (.1259") 12.5 mm (.492") 50