daewoo — Daewoo Wheel Loader Shop Manual

6. Use an 8 mm allen wrench to remove the plug from the pressure relief valve. See Figure 5-70. 8. Hold the pressure relief valve with a pliers and use a 5 mm allen wrench to remove the set screw. See Figure 5-72. FIGURE 5-70 4999 FIGURE 5-72 5001 7. Use a 10 mm allen wrench to unthread the pressure relief valve from its bore. See Figure 5-71. 9. The pressure relief valve is composed of a valve housing, valve needle, spring, and set screw. See Figure 5-73. FIGURE 5-71 5000 FIGURE 5-73 5002 10. Clean all parts with a nonflammable, nontoxic solvent. Carefully inspect all parts. Replace all worn or broken parts. Use only new O-rings to assemble the valve.

Coat all parts with oil before assembling them. 5-20 POWER STEERING MEGA 300-III Shop Manual