Priority Valve 3. Use the open end wrench to loosen the LS plug. See Figure 5-67. Remove the O-ring. Disassembly 1. The following tools are necessary to repair the priority valve. See Figure 5-65. Open end wrench – 27 mm Slip joint pliers Nylon rod Allen wrenches – 5 mm, 8 mm, 10 mm FIGURE 5-67 4996 4. Remove the spring. See Figure 5-68. FIGURE 5-65 4994 2. Use the open end wrench to loosen the PP plug. See Figure 5-66. Remove the O-ring. FIGURE 5-68 4997 5. Use a nylon rod to push the spool out of the bore. See Figure 5-69. FIGURE 5-66 4995 FIGURE 5-69 4998 MEGA 300-III Shop Manual POWER STEERING 5-19