daewoo — Daewoo Wheel Loader Shop Manual

4. Remove the rings (7, Figure 7-11), poppet (8), and spring (6). 6. Remove the cam ring (12, Figure 7-13). 6. Spring 7. Rings 8. Poppet 12. Cam Ring FIGURE 7-13 4045 FIGURE 7-11 4043 7. To prevent the vanes from falling out of their slots, wind a rubber band around the rotor assembly (13, Figure 7-14). Remove the rotor assembly. Use a piece of paper to mark down the position of each vane before removing the vanes from the rotor. This will help return each vane to the slot that it was removed from. Remove the vanes from the rotor. 5. Remove the spring (11, Figure 7-12), plate (10), and O-ring seal (9). 9. O-ring Seal 10. Plate 11. Spring 13.

Rotor Assembly FIGURE 7-12 4044 FIGURE 7-14 4046 7-6 HYDRAULIC SYSTEM Mega 300-III Shop Manual