8. Remove the O-ring seal (15, Figure 7-15) from the adapter (14). Remove the adapter (14). 10. Remove the bolts (19, Figure 7-17) and remove the pump cover (18). 14. Adapter 15. O-ring Seal 18. Pump Cover 19. Bolts FIGURE 7-15 4047 FIGURE 7-17 4049 9. Remove the O-ring seal (17, Figure 7-16) and pins (16). 11. Remove the O-ring seal (22, Figure 7-18) and seal rings (20) and (21). 16. Pin 17. O-ring Seal 20. Seal Ring 21. Seal Ring 22. O-ring Seal FIGURE 7-16 4048 FIGURE 7-18 4050 Mega 300-III Shop Manual HYDRAULIC SYSTEM 7-7