17. Remove the bolts (31, Figure 7-23) that secure the second pump section to the third pump section. 20. Remove the spiral retainer ring (34, Figure 7-26) from the pump body. Remove the shaft and bearing assembly from the body. 31. Bolts 34. Retainer Ring FIGURE 7-23 4055 FIGURE 7-26 4058 18. Remove the body and shaft assembly (32, Figure 7-24). 21. Use a snap ring pliers to remove the bearing retainer ring (35, Figure 7-27) from the shaft. 32. Body and Shaft Assy. 35. Bearing Retainer Ring FIGURE 7-24 4056 FIGURE 7-27 4059 19. Remove the O-ring seal (33, Figure 7-25) from the pump body. 22. Press the shaft out of the bearing. See Figure 7-28. 33.
O-ring Seal FIGURE 7-28 4060 FIGURE 7-25 4057 Mega 300-III Shop Manual HYDRAULIC SYSTEM 7-9