daewoo — Daewoo Wheel Loader Shop Manual

27. Place the cover (45, Figure 7-63) on the pump. Install the bolts through the cover and tighten them. 2. Connect the hoses (2, Figure 7-66) to the pilot pump. 2. Pilot Pump Hoses 45. Cover FIGURE 7-63 4095 FIGURE 7-66 4098 28. Place the O-ring seal (46, Figure 7-64) on the pump body. 3. Connect the hoses (3, Figure 7-67), (4), and (5) to the pump. 46. O-ring Seal 3. Inlet Hose 4. Outlet Hose 5. Hose FIGURE 7-64 4096 FIGURE 7-67 4099 Pump Installation 1. Support the pump (1, Figure 7-65) with a hoist. Move the pump into position and install and tighten the bolts. 1. Pump FIGURE 7-65 4097 Mega 300-III Shop Manual HYDRAULIC SYSTEM 7-17