Hydraulic Circuits and Components Port A of the restriction valve is connected to the oil return line of the control valve. See Figure 7-68. Port B is connected to the center bypass line of the control valve. When all the control valves are in neutral, the oil returns through port B and is returned to tank without being restricted. Restriction Valve The restriction valve is located at the tank port of the control valve. This valve creates a constant pressure in the return line when any of the control valves are being operated. If no control valve is being operated, the oil that flows through the open centers of the control valves passes through the restriction valve without being restricted.
See Figure 7-116. If any spool is being operated, the center bypass line is blocked. Return oil must now pass through the control valve oil return line and port A of the restriction valve. Oil passing through port A must overcome the spring force (1, Figure 7-68) of the poppet (2) to pass through the restriction valve. See Figure 7-69.This creates pressure in the return oil circuit all the way back to the cylinder that is being operated. 1. Poppet Spring 2. Poppet FIGURE 7-68 5011 FIGURE 7-69 5012 7-18 HYDRAULIC SYSTEM Mega 300-III Shop Manual