daewoo — Daewoo Wheel Loader Shop Manual

Unloading Valve The unloading valve is made up of three cartridges C1, C2, and C3. When pressure in the main pump output line is low, the unloading valve diverts output from the steering pump and directs it to the main pump output line. This line supplies the boom, bucket, and option control valves. This additional fluid creates faster cycle times. When pressure in the main pump output line is high, the unloading valve directs steering pump flow to tank. steering pump to join flow from the main pump to supply the boom, bucket, and option control valves. The pressure at port B of C2 is also present at port C of C2.

When pressure in the main pump output line is above 160 kg/cm 2 , this pressure forces spool (5) of C1 to move against the force of spring (6), which allows the oil in chamber C of C2 to flow through port D of C1 and back to tank. When oil in chamber C flows to tank through port D, the pressure in chamber C drops due to the venturi effect of the orifice (7) in check spool (4). This allows the pressure at B to lift check spool (4) off its seat. This allows the oil that is flowing into port B to flow past check spool (4) to tank. This is the output from the steering pump that is being directed back to tank. Figure 7-71 shows the car- tridge and port location for the unloading valve.

Output from the steering pump passes through the priority valve. See the hydraulic schematic in Figure 7-116. This flow then passes out of the prior- ity valve and enters the unloader valve at port EF. This flow is present at port A of C3 and present at port B of C2. See Figure 7-70. This flow raises the check spool (1) at C3 when the pressure in the output line from the main pump is below 160 kg/cm 2 (2,275 psi.) at port P2. This allows output from the 1. C3 Spring 2. C3 Check Spool 3. C2 Spring 4. C4 Check Spool 5. C1 Check Spool 6. C1 Spring 7. Orifice C. C2 Spool Chamber C1. Valve Cartridge C2. Valve Cartridge C3. Valve Cartridge D. C1 Port E. C1 Port EF. Unloader Valve Port P1.

C3 Port P2. C3 Port T. Tank FIGURE 7-70 4107 Mega 300-III Shop Manual HYDRAULIC SYSTEM 7-19