ENGINE Engine Specifications (D2366T) Detailed Specifications Valve Clearance (cold engine) Intake valves 0.3 mm (0.012") Exhaust valves 0.3 mm (0.012") Cooling System Type Forced circulation by impeller pump Temperature control Thermostat Temperature range 92 – 95°C (180 – 203°F) Lubrication System Type Engine oil pressurized by gear pump Filter Full flow filter, replaceable paper element Cooling system Flat tube type oil cooler Engine Lubrication Pressures At idle 0.8 – 1.4 bar (12 – 20 psi) At max.
engine RPM 3.0 – 4.8 bar (45 – 70 psi) Fuel Filter Type Double stage filtration, 1st stage – felt element 2nd stage – paper Fuel Injection Pump element Type Robert Bosch, P type pump Governor RSV style Fan Belt (standard engine) Radiator fan belt 12.5 mm x 1,600 mm (2 – 0.5" x 63") Electrical System Alternator Type HC-60 (including IC regulator) Capacity 24 V, 60 A Starter Type Reduction or magnetic style Power draw 24 V, 6.6 Kw Engine Oil Capacity System capacity 21 l (5.5 gal US) Fuel Injection Timing and Valve Opening Timing Turbocharger Type Exhaust Gas Driven Lubrication Pressures At idle Min. 0.8 bar (11.6 psi) At max. engine RPM Min. 2.0 bar (29 psi) Rotor Shaft Axial Max.
0.25 mm Clearance (0.0098") Rotor Shaft Radial Max. 0.5 mm Clearance (0.0197") Mega 300-III Shop Manual ENGINE 8-1 Item D2366T Item D2366T Engine type Combustion system No. of cylinders Bore Stroke Total displacement Compression ratio Firing order Diesel in-line Vertical, Water-cooled 4-cycle, Turbocharged DI, Toroidal 6 123 mm (4.85") 155 mm (6.10") 11,051 cm3 (675 in3) 16.5 : 1 1-5-3-6-2-4 Rated Power, Metric Hp (Hp) @ RPM Max.
Torque Kg m (ft lb) @ RPM Weight kg (lb) Engine Dimensions • Length mm (ft in) • Width mm (ft in) • Height mm (ft in) 208 (205) @ 2,200 83 (600) @ 1,300 920 (2,028) 1,294 (4' 3") 790 (2' 7") 1,070 (3' 6") Item D2366T Fuel Injection (BTDC) Valve opening – Intake open (BTDC) – Intake close (ABDC) – Exhaust open (BBDC) – Exhaust close (ATDC) 5.6 degree 18 degree 34 degree 46 degree 14 degree