Wear Limits of Major Engine Components (Continued) 8-6 ENGINE Mega 300-III Shop Manual Item Standard Value Limit (or NOTE) Fuel System Overflow valve, opening pressure Projecting nozzle, height Fuel injection pump, tappet body to pump clearance tappet wear limit camshaft end play control rod, stroke distance sliding resistance Injection timing Injection plunger, lift Pump timing interval, cylinder to cylinder 1 kg/cm2– 1.5 kg/cm2(14 psi – 19 psi) 4.2 mm (0.165") 0.03 mm – 0.07 mm (0.001" – 0.003") Less than 0.2 mm (0.008") 0.02 mm – 0.06 mm (0.008" – 0.0024") 21 mm (0.827") (with calibrated pull test apparatus) 150 g (5.3 oz), maximum (pull scale test) 5.6° BTDC 4.7 mm (0.185") 60° (± 30 s) 0.15 mm (0.006") 0.2 mm (0.008") or above Adjust with shims