daewoo — Daewoo Wheel Loader Shop Manual

Warning for Performing Maintenance on Front Attachment, 1-4 Warning for Riding on Machine, 1-4 Warnings for High Voltage, 1-2 Warnings When Opening Engine Hood, 1-3 Warning to Use Safety Lock, 1-4 Warning When Opening Front Window, 1-3 Long Term Storage, 3-28 Air Tank, 3-28 Battery, 3-28 Cleaning, 3-28 Cooling System Care, 3-28 Hydraulic System, 3-28 Lubrication, 3-28 Keep “Pinch Point” Areas Clear – Use Caution in Reverse, 1-9 Learn the Signal Words Used with the Safety Alert Symbol, 1-7 Mounting and Dismounting, 1-8 Never Use Ether Starting Aids, 1-8 Observe General Safety Rules, 1-8 Operate Carefully on Snow and Ice and in Very Cold Temperatures, 1-9 Operate While Seated at the Operator’s Station ONLY, 1-7 Parking the Machine, 1-9 Shutdown Control Functions, 1-9 Take Time to Provide Good Visibility, 1-8 Travel Precautions, 1-9 M Maintenance, 1-11 Always Use Adequate Equipment Supports and Blocking, 1-12 Check Tire Pressure and Condition, 1-12 Cool-down is Required Prior to Radiator or Reservoir Checks, 1-12 Dispose of All Petroleum-based Oils and Fluids Properly, 1-12 Do Not Run the Engine if Repairs or Work Are Being Performed Alone, 1-11 Do Not Work on Hot Engines or Hot Cooling or Hydraulic Systems, 1-12 Pressurized Hydraulic Oil Fluid Leaks Can Be Dangerous, 1-12 Use Correct Replacement Fasteners Tightened to Proper Torque, 1-12 Use Warning Tag During Service, 1-11 Maintenance Intervals, 3-2 Annually or Every 2,000 Operating Hours, 3-2 Daily or Every 10 Operating Hours, 3-2 Every 250 Operating Hours, 3-2 Every 500 Operating Hours, 3-2 Every 1,000 Operating Hours, 3-2 Every 1,500 Operating Hours, 3-2 Weekly or Every 50 Operating Hours, 3-2 Manually Controlled Pilot Valve, 7-23 Pilot Valve Operation, 7-23 P Parking Brake, 6-9 Planetary Gear Set, 6-7 Power Disengagement Gearbox, 4-82 Assembly, 4-83 Disassembly, 4-82 Power Steering System, 5-1 Cushion Valve Operation, 5-3 Gerotor, 5-3 Left Turn, 5-3 Neutral Operation, 5-2 Power Steering Unit, 5-1 Priority Valve Operation, 5-4 Right Turn, 5-2 Preventive Maintenance, 3-1 Priority Valve, 5-19 Assembly, 5-21 Disassembly, 5-19 R Rear Axle, 6-11 Rear Axle Housing, 6-12 S Safety Precautions, 3-1 Second Gear Valve, 4-12 Assembly, 4-15 Disassembly, 4-12 Severe Conditions Maintenance, 3-20 Shipping and Transportation, 1-13 Obey State and Local Over-the-Road Regulations, 1-13 Steering System Troubleshooting, 5-5 O Operation, 1-7 Before Starting the Engine, 1-7 Be Prepared – Get to Know All Operating and Safety Instructions, 1-7 Boost Starting or Charging Engine Batteries, 1-8 Engine Ventilation, 1-8 Fuel, Oil and Hydraulic Fluid Fire Hazards, 1-8 Mega 300-III Shop Manual INDEX 10-3