daewoo — Daewoo Wheel Loader Shop Manual

Tires and Wheels has been working, when the tires are cold. Use Table 4-2 to determine the correct pressure for front or rear tires when driving the machine, or when working the machine. Proper tire pressure is an important factor in deter- mining tire performance and tire life. A tire that is under-inflated does not properly support the machine, and will wear out quickly. Over-inflated tires have poor traction and puncture easily. Check the tires for damage and embedded objects. Check the valve stems for damage. Use a pressure gauge to measure tire pressure. Always measure tire pressure before the machine Wheel Nut Torque Tighten the wheel nuts to 60 kg m (434 ft lb). Table 4-2 WARNING!!!

If a wheel and tire must be removed from the machine and replaced, or if a tire must be replaced on the wheel, allow this task to be performed only by experienced service personnel. A tire rim could be propelled off the wheel and cause serious bodily injury or death. See Figure 3-52. FIGURE 3-52 2853 MEGA 300-III Shop Manual INSPECTION, MAINTENANCE AND ADJUSTMENT 3-25 Tire Dimension Working Pressure Driving Pressure Front Tire Rear Tire Front Tire Rear Tire 23.5-25-16PR(L-3) (Standard) 3.75 kg/cm2 (53 psi) 3.0 kg/cm2 (43 psi) 2.25 kg/cm2 (32 psi) 2.25 kg/cm2 (32 psi) 20.5-25-16PR(L-2) (Option) 4.25 kg/cm2 (60 psi) 3.5 kg/cm2 (50 psi) 2.5 kg/cm2 (36 psi) 2.5 kg/cm2 (36 psi)