daewoo — Daewoo Wheel Loader Shop Manual

2. Remove the check balls (4), (5), (6) and the compression springs (7), (8), and (9). See Figure 4-6. 5. Remove the spring (22), stop washer (23), and spool (24) from valve bore “c.” See Figure 4-9. Remove the spring (25) and piston (26) from valve bore “b.” Remove the spool (27), from bore “a.” FIGURE 4-6 4445 3. Remove the plugs (10) and (11), O-rings (12) and (13), springs (14) and (15), check balls (16) and (17). See Figure 4-7. Remove set screw (45). FIGURE 4-9 4448 6. Remove the stop plate (32) from bore “c.” See Figure 4-10. Then remove the detent block (33), and spool (34). FIGURE 4-7 4446 FIGURE 4-10 4449 4. Remove the bolts (18) that hold cover (19) to the valve body (20).

See Figure 4-8. Remove gasket (21). FIGURE 4-8 4447 4-8 TORQUE CONVERTER AND TRANSMISSION Mega 300-III Shop Manual