daewoo — Daewoo Wheel Loader Shop Manual

14. Insert spring (7) and check ball (4) into valve body (20). See Figure 4-19. Insert spring (8) and check ball (6) into valve body. Spring length is 54.4 mm (2.1"). 15. Insert check ball (57) and spring (56) into valve body (20). See Figure 4-20. FIGURE 4-20 4459 FIGURE 4-19 4458 16. Insert spool (50) and spring (49) into reverse valve block (47). Spring length is 107 mm (4.2"). Install O-ring (48) and then thread plug (46) into valve block (47). 17. Install gasket (55) and valve block (47) on valve body (20). Install bolts (51, 52, 53, and 54) and secure valve block (47) to valve body (20). Mega 300-III Shop Manual TORQUE CONVERTER AND TRANSMISSION 4-11